Overview
Less Mess Fence Care has been specially developed to colour and protect sheds, fences and other rough sawn garden wood. Its special pigments ensure a rich colour and even coverage in just one coat.
Features
- One coat coverage
- Easy application less mess
- Quick drying
- For rough, sawn wood
Coats
Coverage
Dry
Usage Guide
Apply
Stir thoroughly before use. Try a test area first to ensure that colour and adhesion are acceptable. Please note that the colour in the tub may be different to the final shade when dry. Brush on evenly along the grain. If a deeper colour is required, more coats can be applied. Allow 2-4 hours between coats under normal weather conditions. Product should only be used on rough sawn timber. Do not apply in temperatures below 5 degrees C, in damp conditions or if rain is likely before the product has dried. If using more than one can it is advisable to mix them together in a larger container or finish painting in a corner before starting a new can.
Dry
2-4 hours. Drying times can vary depending on the nature of the surface and the weather conditions.
Clean
Ensure surfaces to be painted are clean. Remove any mould, lichen, algae or moss using an appropriate fungicidal wash.
Cleaning After Final Use: Clean brushes and rollers immediately after final use to reuse them for future projects, saving you money and reducing waste.
Cleaning Steps:
- Remove Excess Product: Scrape off leftover product into a container for reuse.
- Wash with Warm, Soapy Water: Clean brushes and rollers with warm soapy water in a sealed container like a bucket or tub.
- Rinse Thoroughly: Rinse out all soap and paint residues into the same container.
- Dry Naturally: Let tools air-dry and store in a dry, dust-free area.
Dispose Responsibly:
Settle Solids: Let solids settle at the bottom of the container. Pour off clear water for reuse or disposal.
Disposal: Let remaining solids dry fully before disposing of them as solid waste.
Do not flush paint down the drain, including when cleaning painting tools