We are very sorry that we are unable to sell products on our website at this time. Unfortunately we are being impacted by global raw material shortages and continue to see exceptional demand for our products. Please use our Store Locator to help find your nearest Cuprinol stockist. Please note that our Customer Advice Centre cannot accept orders or advise on product availability at stockists, but we are here to assist with any product queries that you may have.
Cuprinol Anti Slip Decking Stain offers a rich semi-transparent colour with a tough durable finish. It has a unique double action formulation which has invisible anti-slip microbeads to make decks safer than untreated wood and a fungicide to help protect the film surface from mould growth.
2.5L covers up to 20m² with 2 coats on bare or previously stained wood.
Absorbent wood, rough sawn wood and grooved decking will reduce coverage.
2.5L, 5L only, limited distributionOrder tester
Stir thoroughly before use. Final colour will depend upon wood type, previous treatment and the number of coats applied. Apply 2-3 coats evenly along the grain, avoiding overlaps. When applying subsequent coats, allow each coat to dry fully before recoating. Avoid heavy wear and tear for a few days after application. On previously stained decking, touch up bare areas and allow to dry before finishing with further coats. Do not apply in temperatures below 5C, in damp conditions or if rain is likely before the product has dried. If using more than one can it is advisable to mix them together in a larger container or finish in a corner before starting a new can.
2-6 hours. Drying times can vary depending on the nature of the surface and the weather conditions.
Remove as much stain as possible from brushes and rollers before cleaning with water. Do not use or store in extremes of temperature or wet conditions.
To find out more about our Anti-Slip Decking Stain, click to watch our video. For more advice on Cuprinol decking products, check out our Help & Advice page here.