Overview
Cuprinol UV Guard Decking Oil can be used to penetrate into wood to replace natural oils and resins lost through weathering. Its tinted formula revitalises the colour of weathered wood.
Features
- Nourishes the wood and protects against the weather
- Lightly tinted finish
- Application by brush
Coats
Coverage
Dry
Usage Guide
Prepare
Ensure the wooden decking to be treated is clean, dry and free from any dirt or loose debris prior to oiling.
Apply
Shake can well before and frequently during use. Brush on evenly along the grain. Apply a second coat if required once the first coat has penetrated into the wood. Do not allow puddles to form.
Dry
Up to 6 hours. Drying times can vary depending on the nature of the surface and the weather conditions.
Clean
Do not use or store in extremes of temperature or wet conditions.
Cleaning After Final Use: Clean equipment immediately after final use to reuse them for future projects, saving you money and reducing waste.
Cleaning Steps:
- Remove Excess Oil: Scrape off leftover oil into a container for reuse.
- Wash with Warm, Soapy Water: Clean equipment with warm soapy water in a sealed container like a bucket or tub.
- Rinse Thoroughly: Rinse out all soap and product residues into the same container.
- Dry Naturally: Let equipment air-dry and store in a dry, dust-free area.
Dispose Responsibly:
Settle Solids: Let solids settle at the bottom of the container. Pour off clear water for reuse or disposal.
Disposal: Let remaining solids dry fully before disposing of them as solid waste.
Do not flush paint down the drain, including when cleaning painting tools
Aftercare
Regular Cleaning
Decked areas can be cleaned at regular intervals using Cuprinol Decking Cleaner.
Maintenance
To maintain the surface finish and its protective properties, re-apply a fresh coat of Cuprinol UV Guard Decking Oil as required, following the Preparation and Application instructions above.