We are very sorry that we are unable to sell products on our website at this time. Unfortunately we are being impacted by global raw material shortages and continue to see exceptional demand for our products. Please use our Store Locator to help find your nearest Cuprinol stockist. Please note that our Customer Advice Centre cannot accept orders or advise on product availability at stockists, but we are here to assist with any product queries that you may have.
Cuprinol Garden Shades has been specially developed to colour and protect sheds, fences and other garden wood. Its special pigments ensure a rich colour and allow the natural texture of the woodgrain to shine through. See our how to videos below.Find your perfect colour
Take It Outside
Two Day Triumph
Watch this short video to see how our colours are inspired by nature and to understand how to the make the most of your garden with our Nature's Neutrals and Nature's Brights palettes.
Inspiration to make the most of your outdoor space.
This year we've split our colour range into two distinctive palettes; Nature's Neutrals and Nature's Brights.
By definition, Nature's Neutrals include all of the colours you would see in the natural world, including the sky, landscape, raw materials and water. They work as the foundation to any colour scheme and any combination of these colours work well together.
For Nature's Brights, used in small amounts alongside Nature's Neutrals, they make a big impact without overwhelming a space. These are the accent colours associated with flowersand are perfect for adding pops of bolder colour to garden furniture and decorative details.
Used together, Nature's Neutrals & Nature's Brights work in perfect harmony.
Not sure which Garden Shades colour is right for you?
Try the Cuprinol Colour Selector....Find out more
The ideal applicator for your Garden Shades,
see it in action & pick up yours today...Find out more
MINIMUM OF 2 COATS REQUIRED. SUBSEQUENT COATS MUST BE APPLIED ON THE SAME DAY NO LONGER THAN 8 HOURS APART. IF NOT POSSIBLE, LIGHTLY SAND DOWN SURFACES BEFORE RECOAT TO ENSURE ADHESION.
All surfaces should be clean and dry. If it has been previously coated, loose, flaking paint should be stripped back to bare wood.
Test a small area first for colour and adhesion.
The final colour will vary depending on the surface and number of coats. If adhesion is inadequate on previous coatings, lightly sand before application. Make sure wood has been pre treated with appropriate wood preserver to prevent wood and decay.
Apply in dry conditions, above 5 degrees Celsius and when bad weather is not forecast, minimum of 2 coats required.
Stir thoroughly, before and during use. Brush on product, evenly, along the grain.
Stir thoroughly before pouring contents into the Cuprinol sprayer. Refer to the Sprayer user guide for full instructions before every use. Cover any nearby surfaces in case of overspray. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent.
Cuprinol Garden Shades will be touch dry in 1 hour under normal weather conditions. On areas subject to wear, such as garden furniture, allow a few days before heavy use or contact with soft furnishings.
Believed to be safe, once dry, for use on wood which pets, wild animals and birds come into contact or gnaw.
Reseal can after use. Clean up spills while still wet. After use, remove as much product as possible from brushes before cleaning with water. Do not store or use in extremes of temperature and protect from frost.