Cuprinol Ultimate Garden Wood Preserver

Coloured active preservatives prevent rot, decay and blue stain on garden wood
£24.00
Size
Paint Calculator
At the moment it is not possible to order this product online. Keep an eye on the website, we are working hard to replenish the stock.
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Coverage 4L covers up to 20m2 on smooth planed wood and 12-16m2 on rough sawn wood in 2 coats.Coverage may vary depending on the condition and nature of the surface
  • Drying Time 2-6 hours depending on the nature of the surface and the weather conditions.Allow the previous coat to soak in before applying the next.
  • Coats 2
Product Features
  • Easy application
Cuprinol Ultimate Garden Wood Preserver has a superior quick drying formulation that works in 3 ways: UV filters give long lasting colours for up to 5 years, added waxes & resins provide advanced weather protection and active ingredients penetrate deep into the wood to protect against rot, decay and blue stain. It can be used on all types of rough or smooth planed wood items such as sheds, fences, summerhouses, gates and arbours.
Application by brush: Apply a minimum of two even brush coats to give a uniform finish. Allow the previous coat to soak in before applying the next. Usually 2-6 hours under normal weather conditions. Please note that the type of wood and any previous treatment will affect colour. Try a representative test area first to ensure colour is acceptable when dry. Do not apply in temperatures or if rain is likely before the product has dried. Apply evenly, avoiding splashing of surrounding plants, brickwork, glass, PVCu etc. Any splashing should be cleaned up immediately (whilst still wet) with water and household detergent. Excessive spillage on plants should be rinsed off immediately before drying. Where a strong colour change is involve, more coats may be required. If using more than 1 pack it is advisable to mix them together in a larger container or finish in a corner before starting a new pack. This product is wax enriched to repel water. Recoat within 2-3 days of previous coat. if a longer period elapses try a test area to ensure product is not repelled.
  • 1. Preparing the Surfaces
    Surfaces should be dry and free from dirt and algae etc. remove any algae, lichen, fungi or moss using an appropriate fungicidal wash or cleaner designed for the job. Wood that has been woodstained, painted, or varnished should be stripped back to bare wood and treated as bare wood. Not suitable for use on timber in ground contact situations.
  • 2. After use
    Clean up any spills while still wet. After use remove as much product as possible from equipment before cleaning with water
  • 3. Storing
    Do not store or use in extreme temperatures and protect from frost
Fetching the data, please wait...