Cuprinol Shed & Fence Protector (FP)
Traditional waterproof protection
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Coverage 1L covers up to 6m2 with 2-3 coats,5L covers up to 30m2.Coverage can vary depending on application and the condition and nature of the surface
-
Drying Time 2-5 days depending on the nature of the surface and weather conditions.Allow the previous coat to soak in before applying the next
-
Coats 2
-
Easy application
Product Description
Cuprinol Shed & Fence Protector(FP) is a lightly tinted formulation that penetrates deep into the wood to give natural, rustic looking colour to both rough sawn and smooth planed timber. Its traditional solvent-based formulation also contains water repellents to help resist rain penetration.
Application Description
Shake tin well before use and frequently during use. This is important to achieve a uniform colour. Apply 2-3 uniform coats with a brush. Apply the second coat after the first has soaked in. The exact colour may be affected by any previous treatment and is darker on sawn, more absorbent, weathered and dark wood. Try a representative area first, to ensure acceptable appearance when dry. Protect plants during application. Allow treated fences etc. to dry thoroughly before refixing plants. Do not splash on plastic, plaster, paint or masonry. Do not spill on asphalt, bitumen, bitumen felt, tar or mastics. Bitumen, rubber and some plastic based materials may soften or swell in contact with the fluid or solvent vapour.
Health & Safety
Tips & Advice
-
1. Preparing the SurfacesSurfaces should be dry and free from bark, dust, dirt and surface coatings including paint or varnish. Remove any algae, lichen, fungi or moss using an appropriate fungicidal wash or cleaner designed for the job.
-
2. After useRemove as much product as possible from equipment before cleaning.For best results ise Polycell brush cleaner
-
3. StoringDo not use or store in extremes of temperature
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator