Cuprinol Decking Cleaner (WB)
Prepares Decking timber before treating
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Coverage 5m2 per litre depending on the condition of the decking. Coverage can vary depending on application method and the condition and nature of the surface
-
Drying Time Leave until dry (minimum 1 hour), then remove any dead growth with brush or by washing the treated area.
-
Recoatable N/A
-
Coats 1
-
Removes dirt,grease and green algae
-
Effectively prepares decks for oiling and staining
-
Water based
Product Description
Cuprinol Decking Cleaner (WB) removes dirt, grease, algae and mould to prepare decks before treating. It is also perfect for cleaning patios and stonework.
Application Description
Remove excessive growths and soiling with a scraper or stiff brush suitable for use on grooved decking. Apply Cuprinol Decking Cleaner by brush only. Scrub affected area with a stiff brush, leave for a few minutes and then rinse off with water. Allow to dry fully before staining or oiling the deck. Cuprinol Decking Cleaner is not intended as a replacement for the regular treatment of your deck.
Health & Safety
Tips & Advice
-
1. Preparing the SurfacesRemove excessive growths and soiling with a scraper or stiff brush suitable for use on grooved decking.
-
2. After useRemove as much cleaner as possible from equipment before cleaning with water
-
3. StoringDo not use or store in extreme of temperatures or wet conditions
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator