Cuprinol Anti Slip Decking Stain
Rich colour and protection for wooden decking
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Coverage The 2.5L can covers up to 20m2 with 2 coats on bare or previously stained wood.Absorbent wood,rough sawn wood and grooved decking will reduce coverage
-
Drying Time 2-6 hours depending on the nature of the surface and the weather conditions
-
Recoatable 2-6 hours
-
Coats 2
-
Long lasting
-
Anti Slip finish
-
Water based
Product Description
Cuprinol Anti Slip Decking Stain offers rich semi-transparent colours with a tough durable finish. It has a unique double action formulation which has invisible anti-slip microbeads to make decks safer than untreated wood and an algicide to help protect the film surface from green algae and mould growth. Ideal for softwood.
Application Description
Stir thoroughly before use. Final colour will depend upon wood type, previous treatment and the number of coats applied. Apply 2-3 coats evenly along the grain, avoiding overlaps. When applying subsequent coats, allow each coat to dry fully before recoating. Avoid heavy wear and tear for a few days after application. On previously stained decking, touch up bare areas and allow to dry before finishing with further coats. Do not apply in temperatures below 5C, in damp conditions or if rain is likely before the product has dried. If using more than one can it is advisable to mix them together in a larger container or finish in a corner before starting a new can.
Health & Safety
Tips & Advice
-
1. Preparing the SurfacesTimber specifically sold as decking is normally pretreated with wood preserver to prevent decay. Ensure timber used in ground contact has been pre-treated or sold specifically for use as decking. Surfaces should be clean, dry and free from algae and mould. For best results brush to remove dirt and debris and then clean the surface with Cuprinol Decking Cleaner. Rinse well and allow to dry. Resinous or oily wood may affect performance. New wood: Wipe with white spirit to remove any natural oils/resins.
Weathered wood: Completely remove all grey wood by sanding back or using Cuprinol Decking Restorer.
Painted or varnished wood: Sand off or chemically strip existing coatings then treat as bare wood.
Previously treated wood: Wash with Cuprinol Decking Cleaner and water to remove dirt and grease and allow to dry. -
2. After useRemove as much stain as possible from brushes and rollers before cleaning with water
-
3. StoringDo not use or store in extremes of temperature or wet conditions
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator