Cuprinol 5 Star Complete Wood Treatment (BP)
Treats, prevents & protects.
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Coverage Up to 5m2 per litre (typically 2-3 uniform coats)
-
Drying Time 1-3 days under typical conditions.Drying time may be extended in confined areas such as under floors and in roof spaces or in cold and damp conditions. Allow the previous coat to soak in before applying the next.
-
Recoatable Allow the previous coat to soak in before applying the next .
-
Coats 3
-
Kills woodworm
-
Long lasting
-
Low odour formulation
-
Prevents re-infestation
-
Prevents rot and decay
Product Description
Cuprinol 5 Star Complete Wood Treatment (BP) is a clear, low odour, water based, all purpose treatment to prevent insect attack, re-infestation and protect from fungal decay. Do not use on beehives or bee keeping equipment.
Application Description
Eradication of woodworm and prevention of woodworm, wet and dry rot attack: Brush: Apply to achieve a coverage rate of 3.5 to 5 m2/l of timber (typically 2-3 uniform coats). Apply subsequent coats after the previous has soaked in. Dip: Dip for at least 3 minutes. The application of this product may cause darkening of some timbers. If colour is critical, try a test area first and allow to dry fully to ensure final appearance is acceptable. Treat all replacement timber. Apply to any surfaces cut after treatment. To ensure thorough protection, treat all surfaces. After full drying most glues, fillers and knotting solutions can be used as normal. Ensure timber is fully dry (allow 3 days) before laying plastic floor tiles, foam or rubber-backed carpets, loft insulation, etc.
Health & Safety
Tips & Advice
-
1. Preparing the SurfacesWood that has been woodstained, painted, or varnished should be stripped back to bare wood and treated as bare wood. Remove excessive dirt and soiling, large areas of algae, lichen or fungi using an appropriate fungicidal wash or cleaner designed for the job. Remove insulation and protect electrical sockets, fuse boxes, etc. Do not use on antique furniture or other water sensitive items. If Cuprinol 5 Star Complete Wood Treatment (BP) is used on wood outdoors it must be over coated with a woodstain or paint.
-
2. After useAfter use remove as much product as possible from equipment before cleaning with water
-
3. StoringDo not use or store in extremes of temperature
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator