Cuprinol Ultimate Garden Wood Protector has a superior formulation that works in 3 ways: UV filters give long lasting colours for up to 5 years, added waxes & resins provide advanced weather protection and active ingredients penetrate deep into the wood top protect against rot, decay and blue stain. It can be used on all types of rough or planed wood such as sheds, fences, summerhouses, gates and arbours.
4L covers up to 20m² on smooth planed wood and 12-16m² on rough sawn wood in 2 coats.
Coverage can vary depending on application method and the condition and nature of the surface.
Application by brush: Apply a minimum of two even brush coats to give a uniform finish. Allow the previous coat to soak in before applying the next . Usually 2-6 hours under normal weather conditions. Please note that the type of wood and any previous treatment will affect colour. Try a representative test area first to ensure colour is acceptable when dry.. do not apply in temperatures or if rain is likely before the product has dried. Apply evenly, avoiding splashing of surrounding plants, brickwork, glass, PVCu etc. Any splashing should be cleaned up immediately (whilst still wet) with water and household detergent. Excessive spillage on plants should be rinsed off immediately before drying. Where a strong colour change is involve, more coats may be required. If using more than 1 pack it is advisable to mix them together in a larger container or finish in a corner before starting a new pack. This product is wax enriched to repel water. Recoat within 2-3 days of previous coat. if a longer period elapses try a test area to ensure product is not repelled.
2-6 hours Drying times can vary depending on the nature of the surface and the weather conditions.
Reseal tin after use. Clean up any spills while still wet. After use remove as much product as possible from equipment before cleaning with water. Do not store or use in extreme temperatures and protect from frost.