Cuprinol PowerPad Decking Oil
Nourishes and protects against weather
- Nourishes and protects wood against the weather
-
Lightly tinted finish
-
For use with Cuprinol PowerPad or a brush
Cuprinol PowerPad Decking Oil gives a lightly tinted finish to nourish and enhance decking timbers and replace oils & resins lost through weathering. Formulated for use with the Cuprinol PowerPad applicator, it easily transforms your decking.
How much do you need?
A 1L pack is sufficient for 8.5m² on bare and previously oiled wood.
Absorbent and rough sawn wood will reduce coverage.
Usage guide
Apply:
Shake the bottle thoroughly before pouring into the Cuprinol PowerPad. Before using, please refer to the user guide supplied with the Cuprinol PowerPad. The final colour will depend upon the wood type, previous treatment and the number of coats applied. Do not apply in temperatures below 5 degrees C, in damp conditions or if rain is likely before the product has dried. In case of an insufficient flow of fluid, carefully pierce the valve with a toothpick or similarly shaped object but DO NOT remove valve from the bottle.
Dry:
Cuprinol PowerPad Decking Oil will be touch dry in 2-6 hours in good drying conditions. When applying subsequent coats, allow to dry fully before recoating. Avoid heavy wear and tear for a few days after application. Apply 2-3 coats depending on the level of protection required.
Clean:
Remove as much oil as possible from the Cuprinol PowerPad before cleaning with water. Do not use or store in extremes of temperature or wet conditions.
