We are very sorry that we are unable to sell products on our website at this time. Unfortunately we are being impacted by global raw material shortages and continue to see exceptional demand for our products. Please use our Store Locator to help find your nearest Cuprinol stockist. Please note that our Customer Advice Centre cannot accept orders or advise on product availability at stockists, but we are here to assist with any product queries that you may have.

Basket Search Stores


Cuprinol Less Mess Fence Care

Cuprinol Less Mess Fence Care
  • One coat coverage
  • Easy application less mess
  • Quick drying
  • For rough, sawn wood

Less mess, easy application

Less Mess Fence Care has been specially developed to colour and protect sheds, fences and other rough sawn garden wood. Its special pigments ensure a rich colour and even coverage in just one coat.

How much do you need?

The 5L can covers up to 24m² with 1 coat or 8 fence panels.

The 6L can covers up to 30m² with 1 coat or 10 fence panels.

The 9L can covers up to 43m² with 1 coat or 15 fence panels.

Coverage can vary depending on application method and the condition and nature of the surface.

Where to Buy

Available to buy in these colours:

    Pack sizes

    5L, 6L, 9L (Black only available in 6L)

    Order tester

    Colour selector

    Try our colour selector

    Usage guide


    Stir thoroughly before use. Try a test area first to ensure that colour and adhesion are acceptable. Please note that the colour in the tub may be different to the final shade when dry. Brush on evenly along the grain. If a deeper colour is required, more coats can be applied. Allow 2-4 hours between coats under normal weather conditions. Product should only be used on rough sawn timber. Do not apply in temperatures below 5 degrees C, in damp conditions or if rain is likely before the product has dried. If using more than one can it is advisable to mix them together in a larger container or finish painting in a corner before starting a new can.


    2-4 hours. Drying times can vary depending on the nature of the surface and the weather conditions.


    Ensure surfaces to be painted are clean. Remove any mould, lichen, algae or moss using an appropriate fungicidal wash.


    View Safety Data Sheet