Basket Search Stores
Products

Products

Cuprinol Garden Furniture Restorer

Prepares wood for protection

Cuprinol Garden Furniture Restorer
  • Works in 15 minutes
  • Ideal before treating with furniture oil or stain
  • Restores grey, weathered wood back to original colour

Cuprinol Garden Furniture Restorer is an easy to use gel that removes the grey, weathered surface wood to reveal the golden timber below. Simply brush on, scrub if needed, leave for 15 minutes and rinse off.

How much do you need?

A 1L tub is normally sufficient for: 8m².

Coverage quoted with 2 coats.

Coverage can vary depending on application method and the condition and nature of the surface.

Pack sizes

1L

Order tester

Colour selector

Try our colour selector

Usage guide

Apply:

Stir thoroughly before use. Wearing suitable protective gloves, apply liberally with a paint brush. The wood will start to lighten in colour. Immediately after application, work into the surface of the wood using a mild abrasive scrubbing pad or stiff bristle brush. Leave to stand until no further lightening occurs, but for no more than 15 minutes. Work manageable areas at a time so that application, abrasion and washing off can be completed within 15 minutes. Wash off with plenty of water using a watering can or hose. Do not use a high pressure washer. Allow the furniture to dry thoroughly before use. In cases of severe weathering a further coat may be necessary to fully restore the colour. If necessary, sand the wood to remove loose fibres and give a smooth base before finishing with an appropriate oil or stain. Do not apply in temperatures below 5C or if rain is likely before the job is complete. Protect any areas underneath the garden furniture being restored. Cuprinol Garden Furniture Restorer should not be allowed to come into contact with grass or plants as it may cause browning or die-back. When washing off, avoid splashing onto plants or grass. If this occurs, dilute splashes with copious amounts of water.

Dry:

16 hours. Allow to dry thoroughly before applying a protective finish.

Clean:

Remove as much restorer as possible from brushes before cleaning with water. Do not use or store in extremes of temperature or wet conditions. Clean up any spills while still wet.