Usage guide

Designed for use with Cuprinol Rollable Decking Treatment, the Cuprinol Decking Roller moulds to the contours of decking. It delivers low splatter, even coverage on all types of timber decking in half the time it takes with a brush.

It has a specially designed roller with woven strands to reach into decking grooves, a lightweight user-friendly handle and the extension pole makes application even easier!

Roller Assembly - Push the Roller sleeve onto the spindle of the handle. The Cuprinol Extension Pole comes in 5 parts and all parts can be used for maximum length, or parts may be omitted if a shorter length is required. The piece with the cone top should be pushed securely into the Roller handle. To assemble, simply push each piece fully into the open end of the next and turn clockwise until tightly secured, finishing with the hanging loop end.

Fully submerge roller into Cuprinol Rollable Decking Treatment. Remove excess fluid by rolling on grid. Roll on in the direction of the slats. Do not allow the Rollable Decking Treatment to form pools in the grooves. This can be avoided by not overloading roller or applying excessive pressure during application. As with all rollers it takes a few minutes of use to reach optimum performance whilst the fluid is being absorbed deep into the pile core.

IMPORTANT: THE CUPRINOL DECKING ROLLER IS NOT SUITABLE FOR USE WITH ANY OTHER CUPRINOL TREATMENT OR PRESERVATIVE.

Remove as much product as possible from roller before storing overnight in an airtight polythene bag or washing with water.

Always read the pack instructions carefully before use.